Canon CX 350 User Manual

Also see for CX 350: User guide User guide

Contents

Canon CX 350 User Manual Manual pdf 12 page image

Safety Warnings and Precautions5Power Supply and Power Cord• Place the printer in a location that meets the specified ranges of temperature andhumidity. If the printer is either too cold or too hot, it may not operate normally.Operating environment: 15 – 30°C (59 – 86°F)RH 10 – 80% (with no condensation)• To ensure normal operation of the printer and avoid possible damage, neverinstall the printer near large office equipment or any other type of electricaldevice that emits a strong magnetic field.• Never block the ventilation ports on the printer.A blocked ventilation port could cause heat tobuild up inside the printer and cause a fire. Also,place the printer in an area where you candisconnect the power cord immediately; keepthe area around the power cord connection freeof obstacles. This allows you to unplug thepower cord quickly in an emergency.● To avoid causing a fire or serious electrical shock, always use the power cordprovided with this printer.● To avoid a fire or electrical shock, do not use an extension cord.● To avoid a fire or serious electrical shock, connect the printer power cord to anindependent power source that is not shared by other equipment or appliances.● To avoid causing a fire or serious electrical shock, make sure that the power plug issecurely and completely inserted into the power source.● Do not cut, damage, or otherwise alter the power cord. To avoid the dangers of fireand electrical shock, never place a heavy object on the power cord, never expose itto heat, and never pull on the cord to disconnect it. If the power cord is damaged inany way (condensation on exposed wires, broken wires, etc.) contact the dealerwhere you purchased the printer or the nearest service center for a replacement.● To avoid personal injury from an electrical shock, never handle the power cord orplug when your hands are wet.● To avoid a fire or serious electrical shock, never knot the power cord or wrap itaround itself.● Disconnect the printer power cord during severe electrical storms. Lightning couldcause a fire or severe electrical shock or damage to the printer.Warning