6Safety Warnings and Precautions● To avoid a fire hazard, occasionally disconnect the power cord from the printer andthe power supply and use a soft dry cloth to clean the cord connectors and theconnection points. Leaving the cord plugged in and not cleaned for a long period,especially in an area subject to dust, oil, and high humidity, could cause theinsulation material to deteriorate.● To avoid damaging the power plug, which could cause a short circuit and cause afire or electrical shock, never pull on the power cord to unplug the cord from thepower supply. Always grip the plug to remove it from the power supply.● If the printer will not be used for a long period, for your safety disconnect the powercord from the power source.● Always keep the area around the power plug free of obstacles so you can unplug iteasily. This allows you to unplug the power cord quickly in an emergency.● Never use any power source other than the one rated for the printer. Also, makesure that the power source can supply sufficient power for the printer. This couldcause a fire or serious electrical shock, or damage the printer.Supply Voltage: AC 220 – 240 V, 50/60 HzPower Consumption: 120 W (max.), Sleep Mode 9 W● Switch the printer off after it has stopped operating and entered the sleep mode.● Do not rapidly switch the printer off and on. This could damage the printer. Afterswitching the printer off, wait at least 5 seconds before you switch it on again.CautionImportant
