1006 TroubleshootingThis section describes how to troubleshoot problems when the printer is not operating correctly.If you cannot solve the problem by following these troubleshooting procedures, please contactthe dealer where you purchased the printer or the nearest service center.6.1 Error or Warning Messages6.2 Paper Jams6.3 Printer Not Operating Correctly6.4 Print Results Are Unsatisfactory6.1 Error or Warning MessagesThe Status Monitor will display a warning or error message when a problem occurs in theprinter while it is idle or during a print job.The Status Monitor will not only display the message, but will also open a window to providemore detailed information about the error and offer some suggestions for troubleshooting theproblem.4.2 Using the Status Monitor■ Error MessagesError Message Problem SolutionPHS door open. The PHS door isopen.Close the PHS door and make sure that it is tightlyclosed.Feeder cover openerror.Feeder cover isopen.Close the feeder cover and make sure that it istightly closed.Front door open. Front door is open. Close the front door and make sure that it is tightlyclosed.Feed error. The paper is not fedcorrectly from thefeeder lift tray.Open the feeder cover and remove the jammedpaper.
