1 Before Using the Printer211.4 Loading PaperThis section describes how to load paper.● This printer can accept the following paper sizes.● The width of the tray is set to accept commercially available business card size (55x 91 mm (2.17 x 3.58 in.)) for printing. To use another size, slide the guide againstthe left or the right side of the paper. If the guide cannot adjust correctly to thepaper width, the paper may not print correctly.If the paper still does not feed correctly even after you adjust the guide, you may beusing paper that requires special adjustment. Please contact the dealer where youpurchased the printer or the nearest service center.1.5 Adjusting to Paper Width● Here is a list of the types of paper that you can use with this printer.• Matte Coated PaperPrints a normal high quality image with no glare.• Glossy PaperPaper with reflectivity about 75% greater than normal paper.You can use recycled paper with this printer. For more details about paper and thepurchase of it, please contact the dealer where you purchased the printer or thenearest service center.To avoid wear on the printer or poor print quality, we recommend that you usespecial print media specially designed for the Canon Color Card printer.NoteThickness: 0.21 – 0.35 mm(0.01 – 0.02 in)Length: 85 – 91 mm(3.35 – 3.58 in)Width: 49 – 55 mm(1.93 – 2.17 in)
