Clearing Paper Jams2-682Troubleshooting17 Follow the instructions on the touch panel displayThe screen indicating the location of the paper jam repeatedly appears on the touch panel display until the paper jam is entirelycleared. For more information, see “Screens Indicating the Locations of Paper Jams,” on p. 2-3.Inside of the Staple Finisher-A1/Booklet Finisher-A1 (Optional)If a paper jam occurs inside of the Staple Finisher-A1 or Booklet Finisher-A1, a screen prompting you to remove the jammed paperappears on the touch panel display. Check the location of the paper jam, and follow the procedure described below, and theprocedure that appears on the touch panel display, to remove the jammed paper.There are some areas inside the machine which are subject to high-voltages When removing jammed paper or when inspectingthe inside of the machine, do not allow necklaces, bracelets, or other metal objects to touch the inside of the machine, as this mayresult in burns or electrical shockWhen removing jammed paper, take care not to cut your hands on the edges of the paperWhen removing paper which has become jammed inside the machine, take care not to cut your hands or injure yourself on theinside of the machine If you cannot remove the paper, contact your local authorized Canon dealerWhen removing paper which has become jammed inside the machine, take care not to allow the toner on the jammed paperto come into contact with your hands or clothing, as this will dirty your hands or clothing If they become dirty, wash themimmediately with cold water Washing them with warm water will set the toner, and make it impossible to remove the toner stainsWhen removing paper which has become jammed inside the machine, remove the jammed paper gently to prevent the toner onthe paper from scattering and getting into your eyes or mouth If the toner gets into your eyes or mouth, wash them immediatelywith cold water and immediately consult a physicianTake care when handling the optional equipment that is attached to the machine. When an optional unit's cover is opened to replace a staplecartridge, discard the punch waste, discard the trim waste, or clear paper or staple jams, prints may still be output if other optional units areoperating normally, and are not involved in the paper or staple jam removal procedure.1 Open the front cover of the finisher••••
