Canon BJC-S820 Quick Start Manual

Also see for BJC-S820: Paper guide User guide Setup instructions

Contents

Canon BJC-S820 Quick Start Manual Manual pdf 15 page image

Basic Printing11To load envelopes:1. Set the paper thickness lever to the right,towards the envelope mark.2. Slide the paper feed guide completely tothe left.3. Press down on the corners and sides of theenvelopes to make them as flat as possible byexpelling all of the air in them. To avoid paperjams, make sure the envelopes are flat beforeyou load them into the sheet feeder.4. With the address side facing up and pointeddown, align the stack with the right side ofthe sheet feeder, then insert the stack intothe printer.5. Slide the paper guide right to the edge ofthe envelope.Cancelling a Print JobYou can cancel a print job in progress in several ways:To cancel a print job using the printer buttons:After a print job has started, press theRESUME/CANCEL button on the printer. The print jobwill be cancelled.• If the edges of the envelopes are not sharp, crease them with theside of a pen. Make sure that none of the flaps are overlapping.• You can load up to 10 standard #10 envelopes in the sheet feeder.Paper thickness leverRESUME/CANCEL buttonS820QSG.book Page 11 Thursday, October 18, 2001 1:41 PM