29Getting Ready to PrintSetting Up and Using a Wireless ConnectionIf you have a computer with an infrared port for wireless data transmission, you can setup a cordless connection with the printer using the IrDA method to effect infrared datatransmission.Before you can set up an infrared connection with the printer, you must perform severalsettings on the computer. Make sure that you read the section below before you set up theconnection. What You Need for Infrared Data TransmissionIn order to use infrared data transmission, you need the Windows 98 plug and playMicrosoft infrared driver Version 3.0. The following items are required in order to set upwireless data transmission between the printer and computer via the infrared ports on theprinter and your computer.Computer IBM PC/AT or a compatible computerCPU Intel® Pentium® or fasterIrDA IrDA 1.1 or laterBaud rate(transmission speed)Max. 4 MbpsInfrared transmissiondevice Built-in infrared port on the computer, or an infraredtransmission adapter connected to the parallel orserial port.Operating system Windows 98
