..27To connect the AC adapter1. Plug the connector end of the AC adapter into the power connector on the right side of the printer.2. Insert the AC adapter plug into a wall outlet.z If the printer is not switched on and the battery requires recharging, theCHARGE/ERROR lamp will light green and remain on to indicate that the batterypack is recharging.z To recharge the battery pack, switch off the printer and connect the AC adapter if it is notalready connected. When the battery pack is fully charged, the CHARGE/ERRORlamp will go off. (p62)Switching the printer on and off1. Before you switch the printer on, check the power lock switch on the right side of the printer. If thepower lock switch is in the left position, slide it to the right.When the power lock switch is in the left position, it locks the power switch off so it cannot be switched onaccidentally during transport.27
