Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting andEnhancing Photos > Using the Face Sharpener FunctionUsing the Face Sharpener FunctionYou can sharpen out-of-focus faces in a photo.You can perform the Face Sharpener function either automatically or manually.1. Select photos in the Select Images screen, then click (Correct/EnhanceImages).The Correct/Enhance Images window appears.NoteYou can also display the Correct/Enhance Images window by clicking (Correct/EnhanceImages) in the Layout/Print or Edit screen. In that case, only the image displayed in Previewcan be corrected/enhanced.See " Correct/Enhance Images Window " for details on the Correct/Enhance Images window.2. Select the image you want to correct from the list displayed in the lower part of theCorrect/Enhance Images window.The image appears in Preview.NoteIf only one image is selected, the thumbnail does not appear below Preview.Auto Correction3. Make sure that Auto is selected.4. Click Face Sharpener.5. Click OK.Page 206 of 853 pagesUsing the Face Sharpener Function
