The face is sharpened and the (Correction/Enhancement) mark appears on the upper left of theimage.NoteEffect levels can be changed using the slider below Face Sharpener.Click (Compare) to display the images before and after the correction side by side so thatyou can compare and check the result.Click Reset Selected Image to undo the correction operation.If you want to apply the correction to all the selected images at once, select the Apply to allimages checkbox.Manual Correction3. Click Manual, then click Correct/Enhance.4. Click Face Sharpener.Move the cursor over the image. The shape of the cursor changes to (Cross).5. Drag to select the area you want to correct, then click OK that appears over theimage.The facial area in and around the selected area is sharpened and the (Correction/Enhancement) mark appears on the upper left of the image.NoteYou can also drag to rotate the selected area.Effect levels can be changed using the slider below Face Sharpener.Click Undo to undo the preceding correction operation.6. Click Save Selected Image or Save All Corrected Images.You can save corrected images as new files.Page 207 of 853 pagesUsing the Face Sharpener Function
