Advanced Guide > Scanning > Scanning with Other Application Software > Scanning with Advanced Settings UsingScanGear (Scanner Driver) > Scanning in Advanced ModeScanning in Advanced ModeIn Advanced Mode, you can specify the color mode, output resolution, image brightness, color tone, etc.when scanning.This section explains how to scan paper/photos from the Platen. See " Scanning Multiple Documentsfrom the ADF (Auto Document Feeder) in Advanced Mode " to scan multiple documents placed on theADF (Auto Document Feeder).1. Place the document on the Platen, then start ScanGear (scanner driver).Starting ScanGear (Scanner Driver)ImportantPlace the document face-down on the Platen and align an upper corner of the document withthe corner at the arrow of the Platen.2. Click Advanced Mode.The Advanced Mode tab appears.NoteSettings are not retained when you switch between modes.3. Set Paper Size and Color Mode.Input Settings4. Click Preview.Preview image appears in the Preview area.Page 522 of 853 pagesScanning in Advanced Mode
