Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality andCorrecting Image Data > Adjusting Color BalanceAdjusting Color BalanceYou can adjust the color tints during printing.Since this function adjusts color balance of the output by changing the ink ratios of each color, it changesthe total color balance of the document. Use the application software if you want to change the colorbalance significantly. Use the printer driver only if you want to adjust the color balance slightly.The following sample shows the case when Color Balance is used to intensify cyan and to diminishyellow so that the overall colors are more uniform.No adjustment Adjusted in Color BalanceThe procedure for adjusting color balance is as follows:You can also set color balance on the Quick Setup tab by choosing Photo Printing under CommonlyUsed Settings, and then choosing Color/Intensity Manual Adjustment under Additional Features.1. Open the printer driver setup window2. Select the manual color adjustmentOn the Main tab, select Manual for Color/Intensity, and click Set....The Manual Color Adjustment dialog box opens.3. Adjust color balanceThere are individual sliders for Cyan, Magenta, and Yellow. Each color becomes stronger when thecorresponding slider is moved to the right, and becomes weaker when the corresponding slider ismoved to the left. For example, if cyan becomes weaker, the color red becomes stronger.You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.After adjusting each color, click OK.Page 310 of 853 pagesAdjusting Color Balance
