Advanced Guide > Scanning > Scanning with Other Application Software > Scanning with Advanced Settings UsingScanGear (Scanner Driver) > Scanning in Basic ModeScanning in Basic ModeIn Basic Mode, you can scan easily by following the on-screen steps.When scanning from the ADF (Auto Document Feeder), documents are scanned without preview. Also,the paper size is set to A4.1. Place the documents on the Platen or ADF (Auto Document Feeder), then startScanGear (scanner driver).Starting ScanGear (Scanner Driver)ImportantWhen scanning from the Platen, place the document face-down on the Platen and align anupper corner of the document with the corner at the arrow of the Platen. See " PlacingDocuments (ADF (Auto Document Feeder)) " for details on how to place documents whenscanning from the ADF (Auto Document Feeder).2. Set Select Source according to the documents.ImportantSome applications do not support continuous scanning from the ADF (Auto Document Feeder).For details, refer to the application's manual.NoteTo scan magazines containing many color photos, scan in Advanced Mode tab with ColorMode set to Color and Descreen set to ON.Scanning in Advanced Mode3. Click Preview.Preview image appears in the Preview area.Page 520 of 853 pagesScanning in Basic Mode
