Cadillac Escalade Owner Manual (GMNA-Localizing-Europe-9367752) -2016 - CRC - 8/13/15Seats and Restraints 111Securing Child Restraints(Rear Seat)When securing a child restraint in arear seating position, study theinstructions that came with the childrestraint to make sure it iscompatible with this vehicle.If the child restraint has the ISOFIXsystem, see ISOFIX Child RestraintSystems 0 107 for how and whereto install the child restraint usingISOFIX. If a child restraint issecured in the vehicle using asafety belt and it uses a top tether,see ISOFIX Child Restraint Systems0 107 for top tether anchorlocations.Do not secure a child seat in aposition without a top tether anchorif a national or local law requiresthat the top tether be anchored, or ifthe instructions that come with thechild restraint say that the top strapmust be anchored.If the child restraint or vehicle seatposition does not have the ISOFIXsystem, you will be using the safetybelt to secure the child restraint inthis position. Be sure to follow theinstructions that came with the childrestraint. Secure the child in thechild restraint when and as theinstructions say.If more than one child restraintneeds to be installed in the rearseat, be sure to read Where to Putthe Restraint 0 94.1. Put the child restraint onthe seat.2. Pick up the latch plate, and runthe lap and shoulder portionsof the vehicle's safety beltthrough or around the restraint.The child restraint instructionswill show you how.3. Push the latch plate into thebuckle until it clicks.If the latch plate will not go fullyinto the buckle, check to see ifthe correct buckle isbeing used.Position the release button onthe buckle so that the safetybelt could be quickly unbuckledif necessary.
