Bosch Conettix D6600 Installation And Operation Manual

Also see for Conettix D6100IPv6: Manual Installation supplement

Contents

No Data Received ReportsIf a message is garbled (incorrect checksum or inconsistent message rounds) due to a noisytelephone line or other difficulty, the receiver withholds the kiss-off tone. This causes thecontrol panel to send the same message again up to four times.No Data ReceivedThe D6600/D6100IPv6 generates one or more of the following events:– Telephone line noise causes the data to be unrecognized.– A control panel sends the data in a format not recognized by the D6600/D6100IPv6.– A control panel transmitted nothing.Figure 13.1: No Data Received MessageData ErrorData Error is a function of PSTN. It is an error condition when the D6600/D6100IPv6 receivespartial data, appears on the LCD, and sends the error to a connected printer.This occurs when telephone line noise causes data to be unrecognizable.Wrong DataWrong Data is a function of the CPU where the PSTN software sends an invalid signal to theCPU. It only sends output to the LCD and any connected printer.1313.113.213.372 en | No Data Received Reports Conettix Communications Receiver/Gateway2012.11 | 08 | 4998122704 Installation and Operation Guide Bosch Security Systems, Inc.