Bosch Conettix D6600 Installation And Operation Manual

Also see for Conettix D6100IPv6: Manual Installation supplement

Contents

ConfigSectionConfigSub-sectionConfigParameterDefaultValueValid Values Descriptioninterface eth0 defaultgateway<None>Accepts inIPv4 addressin dottednotation(192.168.1.1)If IPv4 DHCP is disabled, enter the IPv4Gateway IP Address.interface eth0 dhcpv6 enable enable, disable Determines if IPv6 DHCP is used. If this is setto disabled, then a Static IPv6 Address needsto be specified in the IP AddressConfiguration Parameter.interface eth0 ipv6address<None>Accepts anIPv6 addressIf IPv6 DHCP is disabled, then an IPv6Address must be entered here.interface eth0 ipv6defaultgateway<None>Accepts anIPv6 addressin colonnotation(2001:0db8:85a3:0042:0000:8a2e:0370:7334)If IPv6 DHCP is disabled, enter the IPv6Gateway IP Address.interface eth0 hostname Sets the hostname that is used with DHCP.oem macaddressAllows for an alternate MAC Address to beentered here supporting the failoverconfiguration described in the D6600/D6100IPv6 I&O Guide (4998122704).device shortnameD6686 Sets the product short name displayed incommand mode. (Max of 8 Characters)device long name BoschD6686Sets the product long name displayed incommand mode.bosch tunnel 1 or 2 local port 7700(tunnel1) / 7701(tunnel 2)IP Port number the D6686 is listening on forIP traffic relative to each serial port. See thefailover configuration described in the D6600/D6100IPv6 I&O Guide (4998122704).bosch tunnel 1 or 2 protocol UDP UDP, UDP AES Determines the protocol to be useddepending whether encryption is being used.(See Important Note on next page)bosch tunnel 1 or 2 aes keysize128 128, 192, 256 Determines the Encryption Key Size innumber of bits.62 en | Network Communications Conettix Communications Receiver/Gateway2012.11 | 08 | 4998122704 Installation and Operation Guide Bosch Security Systems, Inc.