7. Advanced7.3.2.3 GammaGamma adjustmentThe gamma parameter determines the way your encoded (luminance) signal is transformed into brightness at the output of the pro-jector. A correct gamma setting will allow the use of a maximum of gradations (brightness levels) in the projected image. Changingthe gamma mainly changes the midtones of the image.How to adjust the Gamma1. Press MENU to activate the Tool bar2. Press → to select the Image item3. Press ↓ to Pull down the Image menu4. Use ↑ or ↓ to select settings5. Press → to pull down the menu6. Use ↑ or ↓ to select Gamma7. Press ENTEROn the screen appears now a slider boxImage 7-88. Use ←or → , the numeric keys on the remote, or the keypad to change the GammaR59770330 SIM 7QP SERIES 07/10/2013 83
