7. Advanced7.9.8 Combiner PatternsWhat can be done?The projector is equipped with different combiner patterns which can be used for adjustment purposes.Geometry adjustments can not be used on these combiner patterns.Some of the patterns can be inverted by hitting ENTER on the RCU while the pattern is displayed and somepatterns can be changed to another color by hitting Color – or Color + on the RCU.Available Combiner Patterns• Composite• Alternating checkerboard• Gray levelsHow to display a Combiner Pattern?1. Press the MENU key to activate the Menu bar.2. Push the cursor key ← or → to highlight Installation in the menu bar.3. Push the ↓ key to pull down the Installation menu.4. Push the cursor key ↑ or ↓ to highlight Combiner Pattern.5. Push the → key to pull down the Combiner Pattern menu.6. Push the cursor key ↑ or ↓ to highlight the desired Combiner PatternImage 7-2027. Press ENTER to confirmThe Internal Pattern will be displayed.8. Press BACK to return to the Installation menu.232 R59770330 SIM 7QP SERIES 07/10/2013
