7. Advanced7.8.5.3.1 The soft edge edit wizardThe geometry wizardWhen entering the Edit mode, the Edit dialog box is displayed.Description of the Edit dialog boxAn intuitive user interface is used to perform all the Soft edge adjustments.Image 7-120Field/adjustmentDescription NotesPlanes Allows to select the type of soft edges :- internal soft edge- Alpha-Beta planesEdges It is possible to select one or more of the 4 edges of theimage:Left/Top/Right/BottomA Disabled edge is a hard edge. Adjusting ahard edge results in a blanking adjustment.See blankingSource The background image on which the soft edge adjustmentis applied can be the source or a full white image (pattern)The procedures in this manual are explainedusing a full white backgroundAdjustment guide An adjustment guide consisting of a 4 brightness graduatedbars can be applied on the background image during thesoft edge adjustmentHierarchy level Allows to select the level of the adjustment.Reset The soft edge shape is set to default settings. Soft edge shape follows geometry settings,the shape of the soft edge is set to 12.5%,enabled edges stay enabled, disabled edgesstay disabledTable 7-4dialog box legend164 R59770330 SIM 7QP SERIES 07/10/2013
