7. Advanced7.6.2 Lamp runtime warningWhat can be done ?When the lamp has reached a predetermined runtime , a warning message will be displayed on the screen. The lamp runtimewarning can be set in a range from 30 to 200 hours. The runtime warning is displayed by default at 30 hours before end of lamplifetime. This warning message can be removed by hitting Back on the RCU.When the Warning messages are disabled in the hidden Service menu, the lamp runtime warning will only bedisplayed at the next startup of the projector, not during a session. Enabling or disabling TextBox does notaffect the display of the lamp runtime warning.How to set the lamp runtime warning ?1. Press MENU to activate the Tool bar2. Press → to select the Lamps item3. Press ↓ to pull down the Lamps menu4. Use ↑ or ↓ to select Runtime warning...Image 7-965. Press ENTERA dialog box is displayedImage 7-976. Use ←or →, the numeric keys on the remote, or the keypad to change the runtime warning setting.142 R59770330 SIM 7QP SERIES 07/10/2013
