Barco MXRT-1450 User Manual

Also see for MXRT-1450: User guide User guide

Barco MXRT-1450 User Manual Manual pdf 12 page image

2. Display Controller installation2.5.2 Active Single-Link DongleAboutBarco Display Controllers are not compatible with third-party active single-link dongles. Please use Barcopassive Single-Link dongles.2.5.3 Active Dual-Link DongleAboutThe active Dual-Link Dongle converts DisplayPort input signals to dual-link DVI output signals. Unlike thepassive Single-Link dongle, the Dual-Link dongle allows higher resolutions (greater than 1920x1200) oncolor displays.USB calibration must be used when connecting a display through a Dual-Link dongle.Image 2-10Dual-Link dongle1 To computer’s USB port2 To display via DVI Dual-Link cable3 To DisplayPort connector on Barco Display Controller2.6 Shipping the Barco Display ControllerAboutAfter the installation and validation of software components, Barco recommends removing the displaycontrollers from the workstation and returning them to their original packaging prior to shipment.Barco does not recommend shipping display controllers installed in the workstation.If it is necessary to ship a controller installed in a workstation, the MXRT-7600 requires an extender bracketto protect against shock and vibration. Assemble the extender bracket as shown below. Refer to theworkstation user documentation on proper installation to its card guide.10 K5905271 DISPLAY CONTROLLER 27/02/2017