4. InstallationOPEN LOCKEDImage 4-13Power plug spring system4.5.2 The front panelViewThe front panel of the projector can be divided in 2 major parts :1. Signal Input/Output section2. System input/output section'(6.723,1387'(6.723,1387535535 *<*< %3%%3% +V&V+V&V 9V9V 9,'(29,'(2 69,'(269,'(2'9,'9,,1,1 ,1,1//67(5(2,138767(5(2,1387 67(5(228738767(5(2287387// //,1,1 ,1,1 ,1,1 ,1,1&20387(5&20387(556&56& '9,'9, 5&5&'(6.723,1387535 *< %3% +V&V 9V 9,'(2 69,'(2'9,,1 ,1/67(5(2,1387 67(5(2287387/ /,1 ,1 ,1 ,1'9,56& '9, 5&12Image 4-14Front panel connectionsThe signal input/output sectionThe input/output section has a modular architecture i.e. it is composed of several (5) slots which can be equipped with different inputmodules :The different available inputs that can be installed :• RGBHV, YUV & Video analog input• twin dual DVI input• Stereo inputs• SDI/HDSDI• DVI (HDCP) / D15The different available outputs :• DVI output & RS232 INThe projector is by default equipped as follows:• Layer 1: empty (can be fitted with any input board)• Layer 2: RGB, YUV & Video input board (fixed)• Layer 3: twin dual DVI input board (fixed)• Layer 4: Stereo input board (fixed)• Layer 5: DVI output and RS232 board (fixed)R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013 23
