7. AdvancedImage 7-1375. Press ENTERThe projection can also be interrupted using the PAUSE key on the RCU. To restart the image projection pressPAUSE7.8.3 FreezeFreezing the imageWith the Freeze function, the image can be frozen. To restart the image, reuse the Freeze function or press the FREEZE button onthe remote.How to freeze the image ?1. Press MENU to activate the Tool bar2. Press → to select General3. Press ↓ to Pull down the General menu4. Use ↑ or ↓ to select FreezeImage 7-1385. Press ENTER to activate the Freeze functionThe image can also be frozen using the FREEZE key on the RCU7.8.4 Standby TimerWhat can be done ?If there is no (sync) signal at any of the input connectors, and the standby timer is enabled, the projector will shut down after a predetermined time.The countdown time can be set in a dialog box in a range from 180 to 3600 seconds (default value = 300). The Timer can also bedisabled.How to enable the timer ?1. Press MENU to activate the Tool bar2. Press → to select General3. Press ↓ to Pull down the General menu4. Use ↑ or ↓ to select Standby Timer128 R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013
