4. InstallationProjectorScreenHorizontal Shift in Nominal Position Horizontal Shift : +100%ProjectorScreenBarcoiConNH-12BarcoiConNH-12Image 4-4Example of a horizontal shift of 100%Projector ProjectorScreenVertical Shift in Nominal PositionScreenScreenVertical Shift : +100% Vertical Shift : -25%ProjectorImage 4-5Example of a vertical shift of +100% and -25%4.2.4 Lens installationNecessary toolsHexagonal key 4 mm (hexagonal) - delivered with the projectorNecessary parts• Lens• Lens interface plate (pre-mounted on the lens holder)• 4x M5x12 screws (delivered with the projector and with the lens)How to install the lens ?1. Remove the lens interface plate from the lens holder if it is still mounted to it2. Fix the lens interface plate to the lens using the delivered screws (4)Note: Install the lens and the lens interface plate with their screening UP or TOP oriented in the same directionCaution: Mind the orientation of the lens interface plate in relation to the lens.R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013 17
