Remove the blade from its holderby grasping the tabbed end of theblade. Pull firmly until the tabscome out of the holder.Examine the new wiper blades. Ifthey have no plastic or metalreinforcement along the backedge, remove the metalreinforcement strips from the oldwiper blade, and install them inthe slots along the edge of the newblade.Slide the new wiper blade into theholder until the tabs lock.Slide the wiper blade assemblyonto the wiper arm. Make sure itlocks in place.Lower the wiper arm down againstthe windshield.Disconnect the blade assemblyfrom the wiper arm by pushing inthe lock tab. Hold the lock tab inwhile you push the blade assemblytoward the base of the arm.2. 3. 5.4.6.7.Wiper Blades Maintenance301LOCK TAB BLADE REINFORCEMENTBLADE
