You can select the displayedlanguage and also customize somevehicle control settings to your likingwith the multi-information displayand the three buttons on the steeringwheel (see page ).When you unlock and open thedriver’s door, the display shows‘‘DRIVER 1’’ or ‘‘DRIVER 2’’depending on which remotetransmitter/keyless access remoteyou use, and the driver’s seat and theoutside mirrors move to the positionstored in that remote transmitter/keyless access remote (see page).The driver’s ID (1 or 2) is displayedwhen the power mode is set to ON.The multi-information display in theinstrument panel displays variousinformation and messages when theignition switch is in the ON (II)position. Some of the messages helpyou operate your vehicle morecomfortably. Others help to keepyou aware of the periodicmaintenance your vehicle needs forcontinued trouble-free driving.Models equipped with thekeyless access system have anengine start/stop button insteadof an ignition switch. ON Modeis the equivalent of ON (II). Formore information, see pagesand .There are three types of messages:normal display messages, engine oillife and maintenance messages, andsystem messages.:184 18779170On models with keyless access systemNormal Display MessagesMulti-Information Display78Remote transmitter/keylessaccess remote 1 is used.Remote transmitter/keylessaccess remote 2 is used.2/07/20 10:39:41 31TK4640_083
