Install a new oil filter according tothe instructions that come with it.Make sure to clean off any dirtand dust on the contacting surfaceof a new oil filter.Put a new washer on the drain bolt,then reinstall the drain bolt.Tighten the drain bolt to:Refill the engine with therecommended oil.Engine oil change capacity(including filter):Remove the oil filter, and let theremaining oil drain. A specialwrench (available from yourdealer) is required.Make sure the oil filter gasket isnot stuck to the contacting surfaceof the engine. If it is, remove itbefore installing a new oil filter.Run the engine until it reachesnormal operating temperature,then shut it off.Open the hood, and remove theengine oil fill cap. Remove the oildrain bolt and washer from thebottom of the engine. Drain the oilinto an appropriate container.3.5.6.4.1.2.CONTINUEDChanging the Engine Oil and Filter Maintenance545OIL FILTERDRAIN BOLT WASHER29 lbf·ft (39 N·m , 4.0 kgf·m)4.5 US qt (4.3 )2/07/20 11:40:18 31TK4640_550
