Absolute Process Instruments API 6380 G HV Series Quick Start Manual

Absolute Process Instruments API 6380 G HV Series Quick Start Manual Manual pdf 1 page image

AC to DC Transmitters, Isolated, Field Rangeable API 6380 G HV SeriesInput: 0-50 mVAC to 0-600 VAC, 0-5 mAAC to 0-200 mAACOutput: 0-1 VDC to ±10 VDC, 0-2 mADC to 0-20 mADCO One Minute Setup for Hundreds of I/O RangesO External Switches & Tables for Range SelectionO Non-Interactive Zero and Span CalibrationO Full 2000 V Input/Output/Power IsolationO Input and Output LoopTracker®LEDsO Output Test ButtonO Built-In Loop Power Supply for mA OutputQ Convert AC Signals to DC Process SignalsQ Monitor Line Voltage or Current LevelsQ Isolate and Convert AC Signals for Panel Meters, PLCs,Recorders, Data Acquisition, DCS, & SCADA SystemsApplicationsModel Input Output Module PowerAPI 6380 G HVField configurable0-50 mVAC to 0-600 VAC0-5 mAAC to 0-200 mAACField configurable0-1 VDC to 0-10 VDC±1 VDC to ±10 VDC0-2 mADC to 0-20 mADC115 VACAPI 6380 G A230 HV 230 VACAPI 6380 G P HV 85-265 VAC or 60-300 VDCAPI 6380 G DHV 9-30 VDCAPI 6380 G S HV Field configurableTrue RMS input measurement0-50 mVAC to 0-600 VAC0-5 mAAC to 0-200 mAACField configurable0-1 VDC to 0-10 VDC±1 VDC to ±10 VDC0-2 mADC to 0-20 mADC115 VACAPI 6380 G A230 S HV 230 VACAPI 6380 G P S HV 85-265 VAC or 60-300 VDCAPI 6380 G D S HV 9-30 VDCDescriptionThe API 6380 G HV accepts an AC voltage or current input andprovides an optically isolated DC voltage or current output thatis linearly related to the input. Accuracy is maintained overa wide frequency range for maximum flexibility. A true RMSmodel API 6380 G HV S is available for distorted AC inputs.The full 3-way (input, output, power) isolation makes this mod-ule useful for ground loop elimination, common mode signalrejection or noise pickup reduction.24 input and 16 output ranges can be field-configured viaexternal rotary and slide switches. Popular ranges are listedon the module label. Consult the factory for assistance withspecial ranges.LoopTrackerAPI exclusive features include two LoopTracker LEDs (green forinput, red for output) that vary in intensity with changes in theprocess input and output signals. These provide a quick visualpicture of your process loop at all times and can greatly aid insaving time during initial startup and/or troubleshooting.Output TestAn API exclusive feature includes the test button to provide afixed output (independent of the input) when held depressed.The test output level is potentiometer adjustable from 0 to100% of output span.The output test button greatly aids in saving time during initialstartup and/or troubleshooting.AC Input RangesField selectable ranges via switch settingsSystem voltages must not exceed socket voltage ratingVoltage: 0-50 mVAC to 0-600 VACCurrent: 0-5 mAAC to 0-200 mAACS option: True RMS input measurementInput Frequency40 Hz to 1000 Hz sinusoidalInput ImpedanceVoltage (0-4 VAC): 1 MΩ minimumVoltage (>4 VAC): 220 kΩ minimumCurrent: 10 Ω typicalCommon Mode Rejection120 dB minimumLoopTrackerVariable brightness LEDs indicate I/O loop level and statusDC Output RangesField selectable ranges via switch settingsVoltage: 0-1 VDC to 0-10 VDCBipolar voltage: ±1 VDC to ±10 VDCCurrent: 0-2 mADC to 0-20 mADC20 V compliance, 1000 Ω at 20 mAOutput LogicNormal acting, internal jumper for output reversalOutput CalibrationMulti-turn zero and span potentiometers for output±15% of span adjustment range typicalOutput Loop Power Supply20 VDC nominal, regulated, 25 mADC, max. ripple <10 mVRMSOutput TestFront button sets output to test level when pressedPotentiometer adjustable 0-100% of spanOutput Ripple and NoiseLess than 10 mVRMSLinearityBetter than ±0.1% of spanAmbient Temperature Range and Stability–10°C to +60°C operating ambientBetter than ±0.02% of span per °C stabilityResponse Time200 milliseconds typical (0-90%)Isolation2000 VRMS minimumFull isolation: power to input, power to output, input to outputHousing and SocketsIP 40, requires installation in panel or enclosureAPI 008 or API 008 FS socketSocket mounts to 35 mm DIN rail or can be surface mountedPowerStandard: 115 VAC ±10%, 50/60 Hz, 2.5 W max.P option: 85-265 VAC 50/60 Hz, 60-300 VDC, 2.5 WA230 option: 230 VAC ±10%, 50/60 Hz, 2.5 W max.D option: 9-30 VDC, 2.5 W typicalFree FactoryI/O Setup! Quick Linkapi-usa.com/6380Free Factory SetupSpecify I/O ranges if factory is to set switchesOption—add to end of model numberU Conformal coating for moisture resistanceAccessories—order as a separate line itemAPI 008 8-pin socket, DIN rail or surface mountAPI 008 FS 8-pin finger safe socket, DIN rail or surface mountAPI CLP1 Module hold-down spring for high vibration ormobile applicationsSocket SoldSeparately2.75"Hot SwappablePlug-In Design2.38"1.75"Variable BrightnessInput LEDOutput Test ButtonOutput Test AdjustOutput SpanOutput ZeroVariable BrightnessOutput LEDMinuteSetup!1H H H H H HH H H H HH H H H H HH H H H HH H H H H HH H H H HH H H H H HH H H H HH H H H H HMade in USAAPI 008600 V RatingAPI 008 FS300 V RatingAPI CLP1www.mod-tronic.com | sales@mod-tronic.com | 1-800-794-5883

/ 2

Related manuals for Absolute Process Instruments API 6380 G A230 HV