ADEMCO VISTA-128FB User Manual

Also see for Vista-128FB: User guide Installation and setup guide Quick start guide

Contents

ADEMCO VISTA-128FB User Manual Manual pdf 51 page image

– 50 –Programming Device TimersGeneral InformationDevice timers consist of an ON time & an OFF time, and selecteddays of the week in which they are active. There are up to 20 timersthat can be used to control various devices, such as lights orappliances. Your installer will have programmed the appropriatedevices into the system (up to 16 devices can be programmed).Each timer controls a single device (designated as an output number)that you select. For example, timer 1 might be set to turn the porchlights on at 7:00pm and turn them off at 11:00pm. Timer 2 might turnon the air conditioner Monday-Friday at 4:30pm to cool the premisesbefore you arrive at 5:00pm, and turn it off at 10:00pm when you areretiring for the night. If desired, different timers can control the samedevice. For example, timer 2 could be used Monday-Friday as in theprevious example, and timer 3 could be set to turn the air conditioneron and off at different times Saturday and Sunday.To enter the device timer menu mode:Enter your security code, then press the # key followed by 83.OUTPUT TIMER # ?01-20,00=QUIT 01Up to 20 timers can be programmed. Eachtimer is identified by a number 1-20. Enterthe desired timer number to be programmed(1-20). Press * to accept entry.06 07:00P 11:45PPORCH LITE 04If that timer number has already beenprogrammed, a summary screen will appear.In this example:06 = Timer #04 = Output Device # affected by this timerPORCH LITE = Output Descriptor forDevice 407:00PM = Start Time;11:45PM = Stop TimePress * to continue.Technical Manuals Online! - http://www.tech-man.com