ADEMCO VISTA-128FB User Manual

Also see for Vista-128FB: User guide Installation and setup guide Quick start guide

Contents

ADEMCO VISTA-128FB User Manual Manual pdf 37 page image

– 36 –Disarming And Silencing AlarmsUsing the 1 OFF KeyThe OFF key is used to disarm the system and to silence alarm andtrouble sounds. See "SUMMARY OF AUDIBLE NOTIFICATION"section for information which will help you to distinguish betweenFIRE and BURGLARY alarm sounds.IMPORTANT: If you return and the main burglary sounder is on, DONOT enter the premises, but call the police from a nearby safe location. Ifyou return after an alarm has occurred and the main sounder has shutitself off, the keypad will beep rapidly upon entering, indicating that analarm has occurred during your absence. LEAVE IMMEDIATELY andCONTACT THE POLICE from a nearby safe location.To disarm the system and silence burglary or fire alarms:OFF1. Enter your security code and press 1 .DISARMEDREADY TO ARM2. The Ready message will be displayed (if no alarms have occurredwhile armed) and the keypad will beep once to confirm that thesystem is disarmed.Memory of AlarmThe keypad displays the zone number and type of alarm for any zonethat has an alarm condition. These messages will remain displayeduntil cleared by a user. If an alarm has occurred, note the zonenumber displayed on the keypad and repeat step 1 above to clear the"Memory of Alarm" and restore the Ready message display. If theReady message will not display, go to the displayed zone and remedythe fault (close windows, etc.). If the fault cannot be remedied, notifythe alarm agency.If the system was armed when the alarm occurred, repeat step 1twice: once to disarm the system, a second time to clear the display.Technical Manuals Online! - http://www.tech-man.com