Contents - Table Of Contents
- Table Of Contents
- Table Of Contents
- Overview
- Product documentation, M2004
- How to read the product manual
- Safety
- General safety information
- Safety risks
- Safety risks related to tools/workpieces
- Safety risks related to pneumatic/hydraulic systems
- Safety risks during operational disturbances
- Risks associated with live electric parts
- Safety actions
- Fire extinguishing
- Emergency release of the robot's arm
- Brake testing
- Risk of disabling function "Reduced speed 250 mm/s
- Safe use of the FlexPendant
- Work inside the robot's working range
- Signal lamp (optional)
- Translate the information on safety and information labels
- Safety related instructions
- DANGER - Moving robots are potentially lethal
- DANGER - First test run may cause injury or damage
- WARNING - The brake release buttons may be jammed after service work
- WARNING - The unit is sensitive to ESD
- WARNING - Safety risks during work with gearbox oil
- Installation and commissioning
- Unpacking
- Working range
- On-site installation
- Manually releasing the brakes
- Orienting and securing the robot
- Suspended mounting
- Loads
- Fitting equipment on the robot (robot dimensions)
- Installation of signal lamp for 1600 (option)
- Installation of signal lamp for 1600 ID (option)
- Restricting the working range
- Installation of additional mechanical stops on axis 1
- Installation of additional mechanical stop on axis 2
- Installation of additional mechanical stops on axis 3
- Installation of position switch, axis 1
- Electrical connections
- Robot cabling and connection points
- Customer connections on the robot
- Making robot ready for operation (Cleanroom)
- Maintenance
- Maintenance schedule and expected component life
- Maintenance schedule
- Expected component life
- Inspection activities
- Replacement activities
- Oil change, gearbox axes 5 and 6
- Oil change, gearbox axes 5- 6, IRB 1600ID
- Replacement of measurement system battery pack
- Cleaning activities
- Repair
- General procedures
- Mounting instructions for bearings
- Mounting instructions for seals
- Complete manipulator
- Replacement of cable harness, IRB 1600ID
- Replacement of complete arm system
- Upper and lower arm
- Replacement of complete upper arm, IRB 1600ID
- Replacement of complete lower arm
- Replacement of wrist unit
- Replacement of wrist unit, IRB1600ID
- Replacement of damper, axis 2
- Replacement of damper, axis 3
- Replacement of Mechanical damper, axis 3, IRB 1600ID
- Replacement of damper, axis 5
- Remove upper arm AW Gun
- Fitting equipment on the robot, IRB 1600ID
- Frame and base
- Replacement of serial measurement unit
- Replacement of push button unit
- Motors
- Replacement of motor, axis 2
- Replacement of motor, axis 3
- Replacement of motor, axis 3, IRB 1600ID
- Replacement of motor, axis 4
- Replacement of motor, axis 4, 1600ID
- Replacement of motor and timing belt, axis 5
- Replacement of motor, axis 5, IRB 1600ID
- Replacement of motor and timing belt, axis 6
- Replacement of motor, axis 6 IRB 1600ID
- Gearboxes
- Service work on gearboxes, axes 3, 4, 5 and 6
- Calibration information
- Calibration methods
- Calibration scales and correct axis position
- Calibration movement directions for all axes
- Updating revolution counters
- Checking the calibration position
- Robot description
- Reference information
- Unit conversion
- Screw joints
- Weight specifications
- Standard toolkit
- Special tools
- Lifting equipment and lifting instructions
- Spare parts and exploded views
- Spare parts - base
- Spare parts - base connections
- Spare parts - frame
- Spare parts - lower arm
- Spare parts - upper arm
- Spare parts - options
- Spare parts - upper arm 1600ID
- Circuit diagram
|
Table of Contents33HAC026660-001 Revision: C© Copyright 2006-2008 ABB. All rights reserved.Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Product documentation, M2004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9How to read the product manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Safety 131.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131.2 General safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141.2.1 Safety in the robot system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141.2.2 Safety risks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151.2.2.1 Safety risks during installation and service work on robot . . . . . . . . . . . . . . . . . . . . . . . . 151.2.2.2 Safety risks related to tools/workpieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171.2.2.3 Safety risks related to pneumatic/hydraulic systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181.2.2.4 Safety risks during operational disturbances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191.2.2.5 Risks associated with live electric parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201.2.3 Safety actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211.2.3.1 Safety fence dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211.2.3.2 Fire extinguishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221.2.3.3 Emergency release of the robot’s arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231.2.3.4 Brake testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241.2.3.5 Risk of disabling function "Reduced speed 250 mm/s" . . . . . . . . . . . . . . . . . . . . . . . . . . 251.2.3.6 Safe use of the FlexPendant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261.2.3.7 Work inside the robot's working range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271.2.3.8 Signal lamp (optional). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281.2.3.9 Translate the information on safety and information labels . . . . . . . . . . . . . . . . . . . . . . . 291.3 Safety related instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301.3.1 Safety signals, general . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301.3.2 DANGER - Moving robots are potentially lethal! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321.3.3 DANGER - First test run may cause injury or damage! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331.3.4 WARNING - The brake release buttons may be jammed after service work . . . . . . . . . . . . . . . . 341.3.5 WARNING - The unit is sensitive to ESD! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351.3.6 WARNING - Safety risks during work with gearbox oil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 362 Installation and commissioning 372.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 372.2 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382.2.1 Pre-installation procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382.2.2 Working range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 402.3 On-site installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 452.3.1 Lifting robot with roundsling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 452.3.2 Manually releasing the brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 472.3.3 Orienting and securing the robot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 492.3.4 Suspended mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 522.3.5 Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 552.3.6 Fitting equipment on the robot (robot dimensions) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 562.3.7 Installation of signal lamp for 1600 (option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 622.3.8 Installation of signal lamp for 1600 ID (option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 642.4 Restricting the working range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 662.4.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 662.4.2 Installation of additional mechanical stops on axis 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 672.4.3 Installation of additional mechanical stop on axis 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 702.4.4 Installation of additional mechanical stops on axis 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 732.4.5 Installation of position switch, axis 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
PreviousNext |