set authentication console 231 set authentication mac on page 239 set authentication web on page 242set authenticationconsoleConfigures authentication and defines where it is performed for specifiedusers with administrative access through a console connection.Syntax — set authentication consoleuser-glob method1 [method2] [method3] [method4] user-glob — Single user or set of users with administrative accessthrough the switch’s console.Specify a username, use the double-asterisk wildcard character (**) tospecify all usernames, or use the single-asterisk wildcard character (*)to specify a set of usernames up to or following the first delimitercharacter—either an at sign (@) or a period (.). (For details, see “UserGlobs” on page 26.) method1, method2, method3, method4 — At least one of up to fourmethods that MSS uses to handle authentication. Specify one or moreof the following methods in priority order. MSS applies multiplemethods in the order you enter them.A method can be one of the following: local — Uses the local database of usernames and user groupson the WX switch for authentication. server-group-name — Uses the defined group of RADIUS serversfor authentication. You can enter up to four names of existingRADIUS server groups as methods. none — For users with administrative access only, MSS performsno authentication, but prompts for a username and password andaccepts any combination of entries, including blanks.The authentication method none you can specify for administrativeaccess is different from the fallthru authentication type none, whichapplies only to network access. The authentication method none allowsaccess to the WX switch by an administrator. The fallthru authenticationtype none denies access to a network user. (See “set service-profileauth-fallthru” on page 374.)
