3Com Wireless LAN Switch WX1200 Command Reference Manual

Also see for 3CRWX120695A: User guide User guide Configuration guide Installation and Basic Configuration Guide Command reference

Contents

3Com Wireless LAN Switch WX1200 Command Reference Manual Manual pdf 109 page image

display security 12-restrict 109display security12-restrictDisplays configuration information and statistics for Layer 2 forwardingrestriction.Syntax — display security 12-restrict [vlan vlan-id | all]vlan-id — VLAN name or number.all — Displays information for all VLANs.Defaults — If you do not specify a VLAN name or all, information isdisplayed for all VLANs.Access — Enabled.History —Introduced in MSS Version 4.1.Examples — The following command shows Layer 2 forwardingrestriction information for all VLANs:VLAN Name En Drops Permit MAC Hits---- ----------- -- ---------- ------------------- ----------1 default Y 0 00:0b:0e:02:53:3e 594700:30:b6:3e:5c:a8 92 vlan-2 Y 0 04:04:04:04:04:04 0Table 24 describes the fields in the display.Table 24 Output for display security 12-restrictField DescriptionVLAN VLAN number.Name VLAN name.En Enabled state of the feature for the VLAN: Y — Enabled. Forwarding of Layer 2 traffic from clientsis restricted to the MAC address(es) listed under PermitMAC. N — Disabled. Layer 2 forwarding is not restricted.Drops Number of packets dropped because the destination MACaddress was not one of the addresses listed under PermitMAC.Permit MAC MAC addresses to which clients in the VLAN are allowedto send traffic at Layer 2.