400 CHAPTER 15: GENERATING R EPORTS9 To prevent 3WXM from replacing an existing report of the same typewith this new report, click next to Overwrite Existing Files to deselectthis option.10 Click Generate.11 When the report is generated, click the report link to view it.The report lists the BSSIDs of the rogues detected by each WX switch. Thereport also shows graphs of the distribution of rogues on the WXswitches, and of trend data.Generating a SiteSurvey OrderThe site survey order contains the locations and MAC addresses of theline-of-site (LOS) points for use when conducting a site survey, and alsoprovides a GIF image of the floor.For the site survey order to be meaningful, you must specify theline-of-site (LOS) points first. (See “Importing RF Obstacle Data from a SiteSurvey” on page 100.)To generate a site survey order1 Select the Reports tool bar option.2 In the Report Category list, select RF Plan Reports.3 In the Reports list, select Site Survey Order.4 Select the scope for the work order. You can select the network plan, asite, a building, or an individual floor.5 Select the language: English German6 To change the output directory for the report, click on the button next tooutput directory, navigate to the new directory, and click Select.7 Click Generate.8 When the report is generated, click View. A browser window containingthe report opens.9 Optionally, select the floor.10 Click View Site Survey Order. The site survey order appears. LOS pointinformation for the selected floor is displayed.
