3Com WX1200 Reference Manual

Also see for OfficeConnect WX1200: User guide Command reference Configuration guide Hardware installation guide Reference manual

Contents

3Com WX1200 Reference Manual Manual pdf 155 page image

Verifying the Wireless Network 1557 Click OK to save the changes and close the box.8 Do one of the following: To use the RF interactive measurement mode, see “Using RFInteractive Measurement Mode”. To generate network design information, see “Generating RFNetwork Design Information” on page 157. Click Finish to save the changes and close the wizard.Using RF InteractiveMeasurement ModeRF interactive measurement mode is useful when you are troubleshootingor surveying the coverage areas on the floor. You can quickly measuresignal strengths for any location on the floor.To use the RF interactive measurement mode1 Click the icon in the toolbar.2 Click any location on the floor. Received signal strength indication (RSSI)measurements for the selected location appear next to the Floor View.See “Reading the RF Measurement Table” for information about thefields in the display.Reading the RFMeasurement TableThe projected signal strengths for the planned equipment from thatmeasurement point are shown in the RF measurement table.X-Y coordinates for the measurement point and display options are alsoavailable to customize the RSSI table. Using this interactive mode can bevaluable when verifying deployment coverage with a portable WLANmeasurement tool on the floor.