11 VERIFYING CONFIGURATIONCHANGES3WXM uses a set of rules to verify WX switch configurations. Changes toa switch’s configuration in 3WXM or in the live network are automaticallyevaluated by comparing the changes to the rules. If the evaluationdetects any error or warning conditions, the information in the Alertspanel is updated: Errors or warnings in a switch’s configuration in 3WXM affect theConfiguration counts. Errors or warnings in the network affect the Network counts.Verification Tabs Click on Configuration or Network in the Alerts panel to display theVerification tabs in the Content panel.The Verification tab contains a Config Verification tab and a NetworkVerification tab: The Config Verification tab shows errors and warnings for switchconfiguration information in 3WXM. The Network Verification tab shows errors and warnings forconfiguration information in the network. The errors and warningscan be for switch configuration items and for the monitoring service.On each tab, the Message column lists error descriptions in red and listswarning descriptions in orange: Errors are serious problems that must be addressed beforedeployment. By default, you cannot deploy a network plan with errorsin it. After fixing errors, verify the network plan again to ensure thatthe errors have been resolved. Warnings are noncritical issues that do not stop deployment. Reviewany warnings and consider resolving the issues before deployment.
