254 CHAPTER 7: C ONFIGURING WIRELESS PARAMETERS14 Click Next.15 Select the VLAN into which you want the switch to place users of theSSID.If you want to specify the VLAN later when configuring the access rules,you can leave the VLAN Name box blank.16 Select or create the radio profile to map to this service profile.By default, the default radio profile is selected. To map the service profile to the default radio profile, leave defaultselected and go to step 17. To map the service profile to a different radio profile, select the radioprofile and go to step 17. To create a new radio profile:a Select Create new Radio Profile and click Next.b Type the radio profile name in the Name box and click Next.c Select the radios you want to manage with the radio profile and clickMove to move them to the Current Members list.If you have not planned RF coverage or configured any MAPs in thenetwork plan yet, no radios are listed. You can add the radios later.(Select the radio profile, click Properties, then select Radio Selection. See“Configuring Advanced Radio Profile Settings” on page 267.)d Go to step 17.17 Click Finish.Configuring a CustomServiceIf none of the other service types is appropriate, you can use the CustomService Profile wizard to configure the service. The screens and optionsthat are displayed depend on the access types and other elections youmake as you use the wizard. All pages and options occur in at least oneof the other service profile wizards. For information, see the proceduresfor the other wizards.
