Viewing and Configuring Radio Profiles 2675 Click Reset To Default.6 Click OK.ConfiguringAdvanced RadioProfile SettingsAfter you configure a radio profile, you can select the radio profile, andclick Properties to display a configuration wizard that contains all theconfigurable parameters for the radio profile. A dialog with the followingtabs is displayed: Radio Profile 802.11 Attributes Auto Tune Service Profile Selection Radio Selection Voice ConfigurationRadio Profile TabThe Radio Profile tab lists settings for the following options: Name—Radio profile name Countermeasures Mode: None—Radios do not use countermeasures. This is the default. All—Radios use countermeasures against devices classified by MSSas rogues and against devices classified by MSS as interferingdevices.A rogue is a device that is in the 3Com network but does notbelong there. An interfering device is not part of the 3Comnetwork but also is not a rogue. MSS classifies a device as aninterfering device if no client connected to the device has beendetected communicating with any network entity listed in theforwarding database (FDB) of any WX switch in the MobilityDomain. Although the interfering device is not connected to yournetwork, the device might be causing RF interference with MAPradios. Rogue—Radios use countermeasures against devices classified byMSS as rogues, but do not use countermeasures against devicesclassified by MSS as interfering devices.
