2N - VoiceBlue Lite; ri,ro redirected inc,out calls%TL=m,c,m,c init minutes,calls in lan (0..65535)%TG#=m,c,ri,ro init minutes,calls,rin,rout in group # (0..65535)%TGALL=m,c,ri,ro init minutes,calls,rin,rout in all groups (0..65535)%TI#=m,c init minutes,calls in inc.group # (0..65535)%TIALL=m,c init minutes,calls in all inc.groups (0..65535)%TM#=m,c,s,m,c,s init minutes,calls,sms in mod # (0..65535)%TMALL=m,c,s,m,c,s init minutes,calls,sms in all modules (0..65535)Service AT commands:!V0FB=key set system key!RE report errors only!RR start report layer2..4 on COM1 (from COM2)!RX stop report layer2..4 on COM1 (from COM2)!R# report messages1=layer1..42=layer2..43=layer3..44=layer4!L# report lan2=ip/arp..telnet3=tcp/udp..telnet4=telnet!P view process info!Q view system info!SG##=ddd,ccc setup new call from AUX to gsm (0..31,32=by prefix)!SP##=ddd,ccc setup new call from AUX to SIP/IP (%E11) ## is ignored!SE##=ddd,ccc setup new call from AUX to SIP/IP (%E11) ## is ignored!WG## wait on call from gsm 0..31,32=all to aux!WE## wait on call from pri2 1..15,17..31,32=all to aux!D disconnect call from/to aux!G=A9 Starts ext. callback control!SB##=VoIPdial,gsmdial,limit Setup new callback VoIPdial=number dialed to VoIP,gsmdila=number dialed to GSM, limit=max.length of callSpecial GSM commands:at&g##=at+cnum view own numberat&g##=at+cpin="####" set pin (before pin checking off !!!)97
