2N Helios IP User Manual

Also see for Helios IP: Configuration manual User manual Installation manual Installation manual Installation manual

Contents

2N Helios IP User Manual Manual pdf 67 page image

Configuration 3.367NetworkThis menu is used for setting the 2N® Helios IP network parameters. A change of anyof these parameters will not show until the next 2N® Helios IP restart.By default, obtaining the IP address from the DHCP server is switched on in2N® Helios IP (DHCP client enabled). To find the IP address of your 2N® Helios IP, usethe 2N® Helios IP Network Scanner program included on the CD. If, in your LAN, theDHCP server is not used or properly configured for your 2N® Helios IP, you can pushthe appropriate quick dialling button sequence to switch 2N® Helios IP into the fixed IPaddress mode (see the Switching to Default Network Parameters – Dynamic IPAddress subsection).DHCP SettingsDHCP client enabledSwitch on the function of obtaining the IP address from the DHCP server.Static SettingsFor Windows OS users: find the network parameters by entering ipconfig –all in thecommand line.Static IP addressSet the static IP address assigned by your local network administrator.Network maskSet the network mask.Default gatewaySet the default network gateway.Primary DNSSet the IP address of the primary Domain Name Server used in your LAN.Secondary DNSSet the IP address of the secondary Domain Name Server used in your LAN.NAT SettingsThese settings are applicable only if 2N® Helios IP is operated in a LAN and assignedno public IP address.