2N Helios IP User Manual

Also see for Helios IP: Configuration manual User manual Installation manual Installation manual Installation manual

Contents

2N Helios IP User Manual Manual pdf 104 page image

Display-Equipped 2N® Helios IP Control as Viewed by External User 4.21044.2 Display-Equipped 2N® Helios IP Controlas Viewed by External UserUntil the display program is uploaded to 2N® Helios IP, the display shows the followingtext: 2N® Helios IP display is not configured; refer to the figure below. In thisstate, 2N® Helios IP behaves and is controlled like no-display models, see Display-Equipped 2N® Helios IP Control as Viewed by External User.With the proper display configuration, the advertisement or electronic name tag modeis displayed upon the 2N® Helios IP power on as pre-programmed.The display-equipped 2N® Helios IP model is controlled using the numeric keypad andquick dialling buttons. Buttons 2, 4, 6 and 8 are cursor keys in the telephone directorymode. Buttons 3 and 6 are functional keys and initiate the action displayed in theright-hand and left-hand screen corners.Advertisement ModeOne or more images defined in the display program are displayed in the advertisementmode. To quit the ad mode and move to the electronic name tag mode, push anyquick dialling button or numeric keypad key.Electronic Name Tags1, 2 or 4 name tags emulating the paper name tags can be displayed in the electronicname tag mode. Push one of the 1, 2, 4 and 5 quick dialling buttons to call the userassigned.You can also enter the door lock opening codes and activate or deactivate a user orprofile in this mode. For steps refer to the no-display 2N® Helios IP subsection. Pushthe quick dialling button 6 to move to the Telephone directory mode and the * buttonto move to the Calling to number mode (only if the telephone function is enabled,see Miscellaneous).