Configuration 3.366Lock CodesA list of the universal lock codes to be entered using a telephone set or the 2N® HeliosIP keypad. The count of these global lock codes is 10 (or 3 for Part Nos.9137131(CK)E, 9137161(CK)E, 9137111(CK)E unless a licence key is used, Part No.9137901). In addition to these ten codes, each user may be assigned a user-dedicatedunlocking code (for Part Nos. 9137131(CK)E, 9137161(CK)E and 9137111(CK)E with alicence key only, Part No. 9137901.)AccessDisable code entering from the user‘s numeric keypad or telephone set.Time profileAssign a time schedule to the lock code for validity management. Refer to theScheduler subsection for details on time schedule settings.Lock code optionsEnable ON/OFF modeYou are recommended to enable different activation/deactivation codes whilesetting the bi-stable lock mode. Use this parameter to set a mode where oddcodes (1, 3, 5, …) are used for lock switch activation and even codes (2, 4, 6, …)for lock switch deactivation. If this mode is OFF (default setting), then any codemakes the lock switch turn into the opposite state (ON/OFF). This does not applyto the mono-stable lock switch mode where the activation time is prolonged.
