Configuration 3.394Caution This selection does not apply to the network settings to avoid networkcollision and disabling the option to configure using the administration webserver. To reset the network settings to default values use the proceduredescribed in the Switching to Default Network Parameters – Static IPAddress and Switching to Default Network Parameters – Dynamic IPAddress subsections.Display ProgramThis menu is used for display program uploading. The display program is preparedusing the configuration tool available on the attached CD. For display settings refer tothe Display subsection.Display Program UploadingUsed for uploading the display program to 2N® Helios IP. Use the Browse buttonto select the configuration file and push to upload it to 2N® Helios IP. If nofile is selected, the current display program is removed from the memory whenthis button is pressed.Figure 3.41 Display Program Uploading
