Quick Configuration for Calling 3.2483.2 Quick Configuration for CallingThis section describes the most common and convenient way of configuration. Fordetails on the configuration parameters refer to the subsections below.Language SelectionBefore starting to configure, select the administration web server language using thefolder menu in the right-hand upper corner of the screen.Network SettingsIf you have not set the IP address obtaining from the DHCP server, change the defaultIP address of your 2N® Helios IP. To set the IP address, use the Other settings –>Network menu as shown in the Network subsection.Static Parameter SettingFor Windows OS users: to know your network parameters, enter in the command line:ipconfig –all.Static IP addressSet the IP address assigned by your LAN administrator.Network maskSet the network mask.Default gatewaySet the default network gateway.Primary DNSSet the primary Domain Name Server IP address for your LAN.Secondary DNSSet the secondary Domain Name Server IP address for your LAN.
