Lenovo thinksystem SR630 manuals
thinksystem SR630
Table of contents
- Table Of Contents
- Table Of Contents
- Chapter 1. Introduction
- Specifications
- Firmware updates
- Configuring the LAN over USB interface manually
- Tech Tips
- Power on the server
- Chapter 2. Server components
- Operator information panel
- Rear view
- Rear view LEDs
- System board components
- System board LEDs
- System board jumpers
- Internal cable routing
- Server models with four 3.5-inch drives
- Server models with four 3.5-inch drives and GPU
- Server models with eight 2.5-inch drives
- Server models with eight 2.5-inch drives and GPU
- Server models with ten 2.5-inch drives
- Server models with ten 2.5-inch drives and GPU
- Power cords
- Chapter 3. Hardware replacement procedures
- System reliability guidelines
- Working inside the server with the power on
- Remove the top cover
- Install the top cover
- Air baffle replacement
- Remove the air baffle
- Rack latches replacement
- Install the rack latches
- Security bezel replacement
- Install the security bezel
- System fan replacement
- Install a system fan
- DIMM replacement
- DIMM installation rules
- Install a DIMM
- Hot-swap drive replacement
- Remove a hot-swap drive
- Install a hot-swap drive
- LOM adapter replacement
- Riser card replacement
- Remove a riser card
- Install a riser card
- PCIe adapter replacement
- Remove a PCIe adapter
- Backplane replacement
- Install the backplane for four 3.5-inch hot swap drives
- Remove the backplane for eight 2.5-inch hot swap drives
- Remove the backplane for ten 2.5-inch hot swap drives
- Install the backplane for ten 2.5-inch hot swap drives
- Remove the rear backplane
- Install the rear backplane
- CMOS battery replacement
- Remove the CMOS battery
- Install the CMOS battery
- TCM replacement (for China only)
- Install the TCM (for China only)
- Rear hot-swap drive assembly replacement
- Install the rear hot-swap drive assembly
- RAID adapter replacement
- Install the RAID adapter
- Serial port module replacement
- Install the serial port module
- M.2 backplane and M.2 drive replacement
- Adjust the retainer on the M.2 backplane
- Install the M.2 backplane and M.2 drive
- RAID super capacitor module replacement
- Remove a RAID super capacitor module on the bottom of the air baffle
- Remove the RAID super capacitor module on the chassis
- Install the RAID super capacitor module on the chassis
- Front I/O assembly replacement
- Remove the front I/O assembly
- Hot-swap power supply replacement
- Install a hot-swap power supply
- Processor and heat sink replacement
- Install a processor and heat sink
- System board replacement
- Remove the system board
- Install the system board
- Update the DMI/SMBIOS data
- Enable TPM/TCM
- Enable UEFI Secure Boot
- Complete the parts replacement
- Chapter 4. Problem determination
- General problem determination procedures
- Resolving suspected Ethernet controller problems
- Power on and power off problems
- Memory problems
- Hard disk drive problems
- Monitor and video problems
- Keyboard, mouse, or USB-device problems
- Optional-device problems
- Serial-device problems
- Power problems
- Observable problems
- Software problems
- Appendix A. Getting help and technical assistance
- Collecting service data
- Contacting Support
- Appendix B. Notices
- Trademarks
- Telecommunication regulatory statement
- Taiwan BSMI RoHS declaration
- Index