Lenovo thinksystem SR630 Maintenance Manual

Also see for thinksystem SR630: Manual Manual Quick start guide Product guide Quick start

Contents

Notes:• Depending on the specific type, the PCIe adapter might look different from the illustrations in this topic.• Use any documentation that comes with the PCIe adapter and follow those instructions in addition to theinstructions in this topic.Remove a PCIe adapterUse this information to remove a PCIe adapter.Before removing a PCIe adapter:1. Remove the top cover. See “Remove the top cover” on page 42.2. Remove the riser assembly. See “Remove a riser card” on page 70.To remove a PCIe adapter, complete the following steps:Watch the procedure. A video of the removal process is available:• Youtube: https://www.youtube.com/playlist?list=PLYV5R7hVcs-C_GGjNudxYy8-c69INMcmE• Youku: http://list.youku.com/albumlist/show/id_50462008Table 16. PCIe adapter removalFigure 59. Riser 1 assembly (LP+LP)Figure 60. Riser 1 assembly (LP+FHHL) Figure 61. Riser 2 assembly (LP)Step 1. (Skip this step for riser 2 assembly.) Pivot the latch on the riser bracket to the open position.Step 2. Grasp the PCIe adapter by its edges and carefully pull it out of the PCIe adapter slot on the risercard.If you are instructed to return the old PCIe adapter, follow all packaging instructions and use any packagingmaterials that are provided.Install a PCIe adapterUse this information to install a PCIe adapter.74 ThinkSystem SR630 Maintenance Manual