OneStart

Menu

Siemens SIRIUS 3RW40 manuals

SIRIUS 3RW40 first page preview

SIRIUS 3RW40

Brand: Siemens | Category: Controller
SIRIUS 3RW40 first page preview

SIRIUS 3RW40

Brand: Siemens | Category: Controller
SIRIUS 3RW40 first page preview

SIRIUS 3RW40

Brand: Siemens | Category: Controller
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Introduction
  9. Safety information
  10. Product description
  11. Operation
  12. Functional principle of the SIRIUS 3RW30 and 3RW40 soft starters
  13. Method of operation of a two-phase controlled soft starter
  14. Starting current asymmetry
  15. Commissioning
  16. Comparison of device functions
  17. Technical data
  18. Functions
  19. Current limiting and ramp-up detection (3RW40 only)
  20. Stop modes
  21. Stop without load (3RW30 and 3RW40)
  22. Motor protection / intrinsic device protection (3RW40 only)
  23. Intrinsic device protection (3RW40 only)
  24. Functions of the RESET buttons
  25. SIRIUS 3RW40 5 and 3RW40 7 soft starters
  26. Other functions of the RESET button
  27. Functions of the inputs
  28. Thermistor input / connection on 3RW40 2 to 3RW40 4
  29. RW40: Output terminals 13 / 14 ON / RUN and 23 / 24 BYPASSED
  30. RW40: Group fault output at terminal 95 / 96 / 98 OVERLOAD / FAILURE
  31. Diagnostics and fault signals
  32. RW40: LEDs and troubleshooting
  33. Application planning
  34. Hydraulic pump application
  35. Installation
  36. Mounting dimensions, clearances, and assembly type
  37. Assembly type: Standalone assembly, side-by-side assembly, direct mounting
  38. Installation requirements
  39. Installation / mounting
  40. Five safety rules for work in or on electrical systems
  41. General feeder assembly (type of coordination 1)
  42. Soft starter with line contactor (type of coordination 1)
  43. Soft starter assembly with type of coordination 2
  44. Capacitors to improve the power factor
  45. Maximum cable length
  46. Connecting
  48. Operator controls, displays, and connections on the 3RW40
  49. Configuration
  50. Selecting the optimum soft starter
  51. Startup class
  52. Application examples for normal starting (CLASS 10) with 3RW30 and 3RW40
  53. Application examples for heavy-duty starting (CLASS 20): 3RW40 only
  54. ON time and switching frequency
  55. Reducing the rated data
  56. Calculating the permissible switching frequency
  57. Calculating the switching frequency (example)
  58. Configuration aids
  59. SIRIUS soft starter training course (SD-SIRIUSO)
  60. Order number system for the 3RW30
  61. Order number system for the 3RW40
  62. Before commencing work: Isolating the equipment from the supply system and ensuring that it cannot be reconnected
  63. Commissioning the 3RW30
  64. Quick commissioning of the 3RW30 and optimization of the parameters
  65. Setting the soft start function
  66. Setting the starting voltage
  67. ON output
  68. RW30: LEDs and troubleshooting
  69. Commissioning the 3RW40
  70. Commissioning procedure
  71. Quick commissioning of the 3RW40 and optimization of the parameters
  74. Current limiting in conjunction with a starting voltage ramp and ramp-up detection
  75. Setting the current limiting value
  76. Setting the soft stop function
  77. Setting the electronic motor overload protection
  78. Motor current settings
  79. Thermistor motor protection
  80. Functions of the outputs
  81. Parameterizing the 3RW40 outputs
  82. Function of the FAILURE / OVERLOAD output
  83. RESET MODE and functions of the RESET / TEST button
  84. SIRIUS 3RW40 5. to 3RW40 7. soft starters
  87. Selection and ordering data for standard applications and normal starting
  88. RW30..-.BB.. control electronics
  89. RW30..-.BB.. power electronics
  90. RW30 26, 27, 28-.BB.. power electronics
  91. RW30 main conductor cross-sections
  92. RW30 auxiliary conductor cross-sections
  93. Recommended filters
  94. Fuseless version
  95. Fused version (line protection only)
  96. Fused version with SITOR 3NE1 fuses
  97. Fused version with SITOR 3NE3/4/8 fuses
  98. RW40
  99. Selection and ordering data for standard applications and normal starting (CLASS 10)
  100. Selection and ordering data for standard applications and normal starting (CLASS 10) (with thermistor motor protection evaluation)
  102. Selection and ordering data for standard applications and heavy-duty starting (CLASS 20)
  104. RW40 2., 3., 4. control electronics
  106. RW40 protection functions
  107. RW40 2. to 7. power electronics
  108. RW40 24, 26, 27, 28 power electronics
  109. RW40 36, 37, 38, 46, 47 power electronics
  110. RW40 55, 56, 73, 74, 75, 76 power electronics
  111. RW40 2., 3., 4. main conductor cross-sections
  112. RW40 5., 7. main conductor cross-sections
  113. RW40 .. auxiliary conductor cross-sections
  119. Motor protection tripping characteristics for 3RW40 (with symmetry)
  120. Win-Soft Starter selection and simulation software
  121. Dimension drawings
  122. RW40 for standard applications
  123. Typical circuit diagrams
  124. Control by pushbutton
  125. Control of the 3RW40 by pushbutton
  126. Control by switch
  127. Control of the 3RW40 by switch
  128. Control in automatic mode
  129. Control of the 3RW40 in automatic mode
  130. Control by PLC
  131. Control of the 3RW40 by PLC
  132. Control with an optional main / line contactor
  133. Control of the 3RW40 with a main contactor
  134. Reversing circuit
  135. RW40 reversing circuit
  136. Control of a magnetic parking brake
  137. RW40 2 to 3RW40 4, control of a motor with a magnetic parking brake
  138. RW40 5 to 3RW40 7, control of a motor with a magnetic parking brake
  139. Emergency stop
  140. RW40 2 to 3RW40 4 emergency stop and 3TK2823 safety relay
  141. RW40 5 to 3RW40 7 emergency stop and 3TK2823 safety relay
  142. RW and contactor for emergency starting
  143. RW40 and contactor for emergency starting
  144. Dahlander / multispeed motor
  145. RW40 2 to 3RW40 4 and Dahlander motor starting
  146. RW40 5 to 3RW40 7 and Dahlander motor starting
  147. Accessories
  148. Modules for RESET
  149. Link modules to 3RV10 motor starter protectors
  150. Optional fan to increase the switching frequency (3RW40 2. to 3RW40 4.)
  151. A.1 Configuration data
  152. A.2 Table of parameters used
  153. A.3 Correction sheet
SIRIUS 3RW40 first page preview

SIRIUS 3RW40

Brand: Siemens | Category: Controller
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Introduction
  8. Additional documentation
  9. Siemens Industry Online Support
  10. Technical Assistance
  11. Safety information
  12. Reactive power compensation
  13. Security information
  14. Recycling and disposal
  15. Five safety rules for work in or on electrical systems
  16. Product description
  17. Functional principle of the SIRIUS 3RW30 and 3RW40 soft starters
  18. Method of operation of a two-phase controlled soft starter
  19. Starting current asymmetry
  20. Applications and use
  21. Comparison of device functions
  22. Accessories
  23. Accessories for 3RW40 soft starters
  24. Product combinations
  25. Functions
  26. Current limiting and ramp-up detection (3RW40 only)
  27. Stop modes
  28. Soft stop (3RW40 only)
  29. Motor protection / intrinsic device protection (3RW40 only)
  30. Intrinsic device protection (3RW40 only)
  31. Functions of the RESET buttons
  32. Manual RESET
  33. Acknowledging faults
  34. Auto RESET
  35. Reparameterizing the ON / RUN output contact
  36. Functions of the inputs
  37. Start input (terminal 3) on 3RW405 and 3RW407
  38. Functions of the outputs
  39. RW40: Group fault output at terminal 95 / 96 / 98 OVERLOAD / FAILURE
  40. RW30: LEDs
  41. RW30: Troubleshooting
  42. RW402 / 3RW403 / 3RW404: LEDs
  43. RW405 / 3RW407: LEDs
  44. RW40: Troubleshooting
  45. Application examples
  46. Hydraulic pump application
  47. Installing the soft starter
  48. Mounting dimensions, clearances, and assembly type
  49. Assembly type: Standalone assembly, side-by-side assembly, direct mounting
  50. Installation requirements
  51. Installation / mounting
  52. General feeder assembly (type of coordination 1)
  53. Soft starter with line contactor (type of coordination 1)
  54. Soft starter assembly with type of coordination 2
  55. Capacitors to improve the power factor
  56. Connecting
  57. Operation
  58. Operator controls, displays, and connections on the 3RW40
  59. Effects on changing the potentiometer settings
  60. Configuration
  61. Configuration procedure
  62. Startup class
  63. Application examples for normal starting (CLASS 10) with 3RW30 and 3RW40
  64. Application examples for heavy-duty starting (CLASS 20): 3RW40 only
  65. ON time and switching frequency
  66. Reducing the rated data
  67. Installation altitude and ambient temperature
  68. Calculating the permissible switching frequency
  69. Calculating the switching frequency (example)
  70. Configuration aids
  71. Article number system for the 3RW30
  72. Article number system for the 3RW40
  73. Commissioning
  74. Quick commissioning of the 3RW30 and optimization of the parameters
  75. Setting the soft start function
  76. Setting the starting voltage
  77. ON output
  78. Commissioning the 3RW40
  79. Quick commissioning of the 3RW40 and optimization of the parameters
  82. Current limiting in conjunction with a starting voltage ramp and ramp-up detection
  83. Setting the motor current
  84. Optimized setting ranges for current limiting
  85. Ramp-up detection
  86. Setting the soft stop function
  87. Setting the motor protection function
  88. Motor current settings
  89. Thermistor motor protection
  91. Parameterizing the 3RW40 outputs
  92. Function of the FAILURE / OVERLOAD output
  93. Technical data in Siemens Industry Online Support
  94. RW30
  95. RW30..-.BB.. control electronics
  96. RW30..-.BB.. power electronics
  97. RW30 26, 27, 28-.BB.. power electronics
  98. RW30 main conductor cross-sections
  99. RW30 auxiliary conductor cross-sections
  100. Recommended filters
  101. Fuseless version
  102. Fused version (line protection only)
  103. Fused version with SITOR 3NE1 fuses
  104. Fused version with SITOR 3NE3/4/8 fuses
  105. RW40
  106. RW40 2., 3., 4. control electronics
  107. RW40 5., 7. control electronics
  109. RW40 control times and parameters
  110. RW40 2. to 7. power electronics
  111. RW40 24, 26, 27, 28 power electronics
  112. RW40 36, 37, 38, 46, 47 power electronics
  113. RW40 55, 56, 73, 74, 75, 76 power electronics
  114. RW40 2., 3., 4. main conductor cross-sections
  115. RW40 5., 7. main conductor cross-sections
  116. RW40 .. auxiliary conductor cross-sections
  122. Motor protection tripping characteristics for 3RW40 (with symmetry)
  123. Motor protection tripping characteristics for 3RW40 (with asymmetry)
  124. CAx data
  125. Typical circuit for the optional thermistor motor protection evaluation
  126. Control by pushbutton
  127. Control of the 3RW40 by pushbutton
  128. Control by switch
  129. Control of the 3RW40 by switch
  130. Control in automatic mode
  131. Control of the 3RW40 in automatic mode
  132. Control by PLC
  133. Control of the 3RW40 by PLC
  134. Control with an optional main / line contactor
  135. Control of the 3RW40 with a main contactor
  136. Reversing circuit
  137. RW40 reversing circuit
  138. Control of a magnetic parking brake
  139. RW402 - 3RW404, control of a motor with a magnetic parking brake
  140. RW405 - 3RW407, control of a motor with a magnetic parking brake
  141. EMERGENCY STOP
  142. RW402 - 3RW404 EMERGENCY STOP and 3TK2823 safety relay
  143. RW405 - 3RW407 EMERGENCY STOP and 3TK2823 safety relay
  144. RW and contactor for emergency starting
  145. RW40 and contactor for emergency starting
  146. Dahlander / multispeed motor
  147. RW402 - 3RW404 and Dahlander motor starting
  148. RW405 - 3RW407 and Dahlander motor starting
  149. A.1 Configuration data
  150. A.2 Table of parameters used
  151. Index
SIRIUS 3RW40 first page preview

SIRIUS 3RW40

Brand: Siemens | Category: Remote Starter
SIRIUS 3RW40 first page preview

SIRIUS 3RW40

Brand: Siemens | Category: Controller
SIRIUS 3RW40 first page preview

SIRIUS 3RW40

Brand: Siemens | Category: Controller
SIRIUS 3RW40 first page preview

SIRIUS 3RW40

Brand: Siemens | Category: Controller
Related products
SIRIUS 3RW40 3SIRIUS 3RW40 7SIRIUS 3RW40 5SIRIUS 3RW40 4SIRIUS 3RW40 2SIRIUS 3RW402SIRIUS 3RW403SIRIUS 3RW44SIRIUS 3RW31SIRIUS 3RW30
Siemens categories
Industrial Equipment
Controller
Control Unit
Circuit breakers
Switch
Hob
Oven
Measuring Instruments
Washer
Relays
More Siemens categories
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved