Kinoton FP 50 A manuals

FP 50 A

Brand: Kinoton | Category: Projector

Table of contents

1. Table Of Contents
2. Table Of Contents
3. Table Of Contents
4. Table Of Contents
5. Safety
6. Intended Purpose
7. Explanations of Symbols and Notes
8. Special Hazard Points
9. Lamphouse Hazards
10. Preventing Projector Damage
11. Protective Devices
12. Transportation and Installation / Mounting
13. Installation
14. Important Hints for Installation
15. Additional Installation Hints
16. Mounting
17. Installing and Connecting the Lamphouse Components
18. Projector Terminal Strips
19. Function and Components
20. Components Overview
21. Film Gate and Film Track
22. The Dowser
23. Single Aperture Plates (only with manual lens turret or lens holder)
24. Drive and Control
25. Changing the Format Combination
26. Lens Turret (option)
27. Electronically Controlled Lens Change (option)
28. Focusing
29. Rotating Shutter
30. Intermittent Sprocket
31. Constant Speed Sprockets
32. Reverse-Scan Sound Device
33. Components
34. Sound Tracks on the Films
35. Drive and Electronic Components
36. Main Drive
37. Friction Drives
38. Electronically Controlled Friction Drives (option)
39. Relay Control Board, Frequency Inverter, Power Supply Unit
40. Operating Elements
41. Friction Control
42. Remote Control Panels (option)
43. Auditorium Panel
44. Operation and Troubleshooting
45. Threading for Projection Operation
46. Troubleshooting
47. Analog Sound
48. Cleaning / Maintenance / Repair
49. Maintenance
50. Drain and Refill Oil (Kinoton type 3672 oil)
51. Adjusting the Film Pressure Skate
52. Adjusting the Height of the Film Pressure Skate
53. Changing the 35 mm Film Runner Strips
54. Adjusting the Lens Holder
55. Adjusting the Tension of the Pad Shoe Spring
56. Changing and Lubricating the Felt Disk of the Mechanical Friction
57. Tension the Chains
58. Parts and Wearing Parts
59. Parts for Motors and Drives
60. Film Spools
61. mm Apertures for Aperture Changer
62. Adapter Rings for 35 mm Lenses
63. Plans of Terminal Connections
66. Terminal Strip X2 (projector functions terminal strip)
67. Terminal Strip X3 (auditorium function terminal strip, optional)
68. Sound Output on 8-pole Terminal Strip
69. Circuit Diagrams
70. Lamphouse 230 V Mains Voltage
71. Lamphouse 120 V Mains Voltage

FP 50 A

Brand: Kinoton | Category: Projector

Table of contents

1. Table Of Contents
2. Table Of Contents
3. Table Of Contents
4. Table Of Contents
5. Table Of Contents
6. Table Of Contents
7. Safety
8. Intended Purpose
9. Explanations of Symbols and Notes
10. Special Hazard Points
11. Lamphouse Hazards
12. Preventing Projector Damage
13. Protective Devices
14. Lamphouse Door Switch
15. Transportation and Installation / Mounting
16. Installation
17. Important Hints for Installation
18. Installation Hints
19. Installing and Connecting the Lamphouse Components
20. Connecting the Water Cooling (option)
21. Function and Components
22. FP 50 D Variations
23. Projector Head
24. Film Gate and Film Track
25. The Dowser
26. Single Aperture Plates (only with manual lens turret or lens holder)
27. Drive and Control
28. Changing the Format Combination
29. Lens Turret (option)
30. Electronically Controlled Lens Change (option)
31. Focusing
32. Rotating Shutter
33. Intermittent Sprocket
34. Constant Speed Sprockets
35. Reverse-Scan Sound Device
36. Components
37. Sound Tracks on the Films
38. Film Transport Systems
39. with a Platter System (option)
40. Drive Components in the Projector Head
41. Main Drive
42. Electronic Components
43. Automation Systems
44. Rectifiers
45. Lamphouse Components
46. Xenon Unit
47. Mirror
48. Operating Elements
49. Auditorium Remote Operating Panel (option)
50. Projector Lamphouse
51. Ignition Button
52. Operation and Troubleshooting
53. Threading for Projection Operation
54. Threading from a Non-Rewind / Platter System
55. Troubleshooting
56. Analog Sound
57. Lamphouse Troubleshooting Chart
58. Cleaning / Maintenance / Repair
59. Maintenance
60. Drain and Refill Oil (Kinoton type 3672 oil)
61. Adjusting the Film Pressure Skate
62. Adjusting the Height of the Film Pressure Skate
63. Changing the 35 mm Film Runner Strips
64. Adjusting the Lens Holder
65. Adjusting the Tension of the Pad Shoe Spring
66. Tension the Chains
67. Adjusting the Mechanical Friction
68. Changing and Lubricating the Felt Disk of the Mechanical Friction
69. Changing the Xenon Bulb
70. Adjusting the Illumination of Screen
71. Adjusting the Intensity of Currents
72. Changing the Reflector
73. Changing the Heat Filter
74. Parts and Wearing Parts
75. Parts for Drive and Motors
76. mm Apertures for Aperture Changer
77. Adapter Rings for 35 mm Lenses
78. Plans of Terminal Connections
81. Basic Unit Overview
82. Main Terminal Strip (optional with terminal 25 - 50)
83. Terminal Strip with CCA3, DMP1 or SA2
84. Circuit Diagrams
85. V - 240 V Mains 3-ph Connection (USA)
86. V - 240 V Mains 3-ph Connection (Japan)
87. Lamphouse