FP 25/30/50 D / FP 10/20/3050 AIssue: 05/2011546 4 3 Adjusting the Height of the Film Pressure SkateThe film pressure skate has to be adjusted so that it rides perfectly on the film gate andthe intermittent sprocket.• Loosen the setscrew (black arrow).• Insert 2 superimposed film layers into the film gate.• Screw the ball pin (white arrow) out or in to the desired length - the skate should justnot be moved vertically. You can use an Allen wrench in the holes of the ball pin torotate it.$Without any film layers in the film gate the skate must have clear tolerance.• When the adjustment is adjusted correctly fasten the setscrew again.
