NEC Express N8800-063E/064E manuals

Express N8800-063E/064E

Brand: NEC | Category: Server

Table of contents

1. Table Of Contents
2. Table Of Contents
3. Table Of Contents
4. CHAPTER 1 BEFORE USING
5. Notes for Safe Handling
6. before using
7. Precautions for Safety
8. Use of Power Supply and Power Cord
9. Installation, Relocation, Storage and Connection
10. Cleaning and Handling of Internal Devices
11. During Operation
12. Rack-mount Model
13. Unpackaging
14. CHAPTER 2 ABOUT OPERATING SYSTEM
15. Installing Windows Server 2003
16. CHAPTER 3 INSTALLING SERVER
17. Installation
18. Installation of Rack-mount Model
19. Connection
20. installing server
21. CHAPTER 4 WINDOWS SETUP
22. ft series Setup
23. Setup Flow
24. Step 1: Things Required for Setup
25. Size of the Partition to be Created
26. Step 2: Prepare for ft series Setup
27. windows setup
28. Prepare NEC Express5800/ft series
29. Step 3: Disable Boot Monitoring Function
30. Step 4: Start the ft series Setup
31. Step 5: Set Dual LAN Configuration
32. Step 6: Set Dual Disk Configuration
33. Setting Dual Disk Configuration by the RDR (Rapid Disk Resync) function
34. setting dual disk configuration
35. Step 7: Update Software
36. Step 9: Create Volume
37. Step 10: Set Network for NEC ESMPRO Agent
38. Step 11: Enable Boot Monitoring Function
39. Step 12: Set up Failure Management
40. Set Dr. Watson
41. Install a Network Monitor
42. Set MTBF Type
43. Step 13: Back up System Information
44. CHAPTER 5 PROCEDURES AFTER COMPLETION OF INSTALLATION
45. Installing Management Utilities
46. operation environment
47. system update
48. NEC ESMPRO Manager
49. system requirement
50. Setting up PCs on a Network
51. Confirmation of the ft Control Software Version
52. Notes to apply the Windows Service Pack
53. CHAPTER 6 TROUBLESHOOTING
54. System Repair
55. Starting up Recovery Console
56. troubleshooting
57. Updating the System
58. Troubleshooting
59. Problems with Windows Setup
60. Problems with NEC ESMPRO Setup
61. Problems with System Repair